20.0GHz (Frequency Range Max.)The Agilent 83623B high power synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83623B to achieve low single-sideband phase noise performance. It also delivers excellent harmonic performance with harmonics at least 25 dB below the carrier from 2.0 to 20 GHz.
- +17 dBm calibrated output power
- -50 dBc harmonics <20 GHz typical
- SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset
- Complete analog sweeper
- 1 Hz frequency resolution (Option 008)
- Pulse, amplitude and frequency modulation (8360B Series only)
- -110 dBm output power with step attenuator (Option 001)
Sweep functions: Control: Start/stop, center/span, marker (M1-M2), alternate sweep Trigger: auto, external, single, or GPIB
Sweep modes: CW and manual modes Accuracy: Same as time base Switching Time: For steps within a frequency band: 15 ms + (step size/1 GHz) × 5 ms step size Maximum, or across band switch points: 50 ms Step or list modes within a frequency band: 5 ms2 + (step size /1 GHz) × 5 ms
Step sweep mode: Accuracy: Same as time base Minimum Step Size: Same as frequency resolution Number of Points: 2 to 801 Switching Time: Same as CW Dwell Time: 100 µs to 3.2 s
List mode: Accuracy: Same as time base Minimum step size: Same as frequency resolution Number of points: 1 to 801 Switching time: Same as CW Dwell time: 100 µs to 3.2 s
Ramp sweep mode: Accuracy (sweep time ≥100 ms and ≤5 s): Sweep widths >n × 10 MHz: (start, stop, and bandedge frequencies are phase-locked corrected during sweep) Lesser of 1% of sweep width or n × 1 MHz + 0.1% of sweep width. Sweep time: 10 ms to 100 s, 300 MHz/ms maximum rate
Specifications
Frequency Range Max.
20.0GHz
More Details
High Power Swept-Signal Generator
