3.00GHz (High end frequency limit)The E7402A EMC standard analyzer provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality.
The EMC standard analyzer offers you the best value with more productivity options built-in, and guarantees the fast delivery.
Radiated emissions When combined with a broadband antenna, the E7402A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.
Conducted emissions Test for noise or interference placed on power or data lines by coupling the E7402A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.
Diagnostics and problem isolation If you have an emissions problem, you can use the E7402A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.
- Automatic EMI measurements
- Compatible with the E7415A software
- Also compatible with the Benchlink Web Remote software
- Log sweep
- 3.5" disk drive
- 5 minute warm-up
- Built-in preamplifier
- Optional tracking generator
- Rugged, portable design
- SCPI programming and IVI COM driver support
Specifications
High end frequency limit
3.00GHz
Resolution Bandwidth Max.
3MHz
Resolution Bandwidth Min.
1Hz
Amplitude Range
DANL to maximum safe input level
More Details
EMC Standard Analyzer, 100 Hz to 3.0 GHz