|
|
Displaying 1 to 10 (of 15 products)
| Product Image |
Item Name- |
Price |
 |
500.00MHz (High end frequency limit)
The 4195A Network/Spectrum analyzer provides excellent vector network and spectrum measurement performance from 10 Hz to 500 MHz. Providing both vector network and spectrum measurement capabilities, the 4195A is a cost... |
|
 |
85.00MHz (High end frequency limit)
N9030AK-RT1 upgrades the N9030A PXA signal analyzer with the real-time spectrum analyzer (RTSA) capabilities. Adding RTSA to a new or existing PXA lets you see, capture and understand the most elusive signals—known or unknown.... |
|
 |
400.00MHz (High end frequency limit)
Frequency measurement range - 100 Hz to 400 MHz in 1 Hz steps Drequency span: full span 0 to 400 MHz, Log 1 to 7 decade log display Zero span - time domain display of any signal at the Reference frequency Resolution... |
|
 |
150.00MHz (High end frequency limit)
The Agilent 3588A spectrum analyzer provides comprehensive frequency-domain measurements and covers the baseband through IF frequency range of 10 Hz to 150 MHz. The Agilent 3588A offers high-performance spectrum... |
|
 |
120.00MHz (High end frequency limit)
Frequency limit: 10 Hz - 120 MHz Resolution bandwidth 3 Hz - 100 KHz Stability <1Hz/min SSB<-125dBc(20KHzoffset) Amplitude:-135dBm-+30dBm TrackingGenerator 10Hz-120MHz -60-+10dBm 1dBstep SpecificationsHigh end frequency... |
|
 |
40.10MHz (High end frequency limit)
The 3585A provides outstanding low frequency performance from 20Hz to 40.1MHz. Overall measurement accuracy is maintained within 0.4 dB by an internal calibration routine, performed by an internal microprocessor. Frequency... |
|
 |
40.10MHz (High end frequency limit)
The 3585B provides 80 to 100 dB of spurious-free dynamic range, a sharp 3Hz resolution bandwidth, and a 20Hz to 40.1MHz frequency range to easily cover most information bandwidths. Minimum Span 0 Hz Maximum Span... |
|
 |
36.00MHz (High end frequency limit)
The R&S FMU36 provides all the functionality you expect from a Rohde & Schwarz analyzer. FFT-based spectrum analyzer with 36 MHz I/Q bandwidth Analog baseband input Balanced/unbalanced 50 Ω /1 MΩ Time... |
|
|
30.00MHz (High end frequency limit)
10Hz to 30MHz frequency range 0.01Hz frequency resolution 2 channels (R and T) input channels 50ohm impedance Wide measurable level range of over 150dB, allowing the measured device to be checked at actual operational levels... |
|
 |
13.00MHz (High end frequency limit)
Single channel input with frequency range of 10Hz to 13MHz. Center frequency accuracy: ±10% of bandwidth setting 300Hz bandwidth ±45Hz; 10kHz bandwidth ±500Hz. SpecificationsHigh end frequency limit13.00MHz... |
|
Displaying 1 to 10 (of 15 products)
|
Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
