PM 6304/57n - Fluke RLC Impedance Meters

100kHz (Test Freq. Range High)

If you want an instrument with remote programmability, consider the Fluke PM 6304 RCL meter. The PM 6304 has a basic accuracy of 0.1%, 3 test voltage levels and 204 test frequencies. The PM 6304C has an even higher basic accuracy, and can measure components or devices with an accuracy of 0.05%. Thanks to this high accuracy, the PM 6304C is idealy suited for calibrating the capacitance sourcing function of the high-performance Fluke 5500A Multi-Product Calibrator.

Select the test you need
Easy-to-use, at-a-glance display
Test frequencies from 50 Hz to 1 MHz (100 kHz for PM 6304)
0.1% basic accuracy (0.05% for PM 6304C)
RS-232 or IEEE-488 interface
AC test levels from 50 mV to 2V rms
Internal or external bias
DC test measurement (optional)
9 front panel setups
Actual component test voltage/current readback
Automatic zero trimming
Contact check and deviation mode (PM 6306 only)
Front-panel test posts for immediate 4-wire measurements

Specifications

Test Freq. Range High

100kHz

Resistance Range High

200MOhm

Capacitance Range High

31.8 F

Measurements

Z, Rac, Rdc, C, L, Q, D, Phase

More Details

RCL Meter with Handler Interface, dc Measurement Unit and RS-232 Interface

Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.

Home
| Services | About Us | Sell Equipment | Contact | Privacy Policy

Dawson Multimedia | Web Design Orlando..