11025 - Chroma RLC Impedance Meters

100kHz (Test Freq. Range High)

Transformer test parameters, Turns Ratio, DCR, Mutual Inductance
50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies
0.1% basic accuracy
21ms measurement time in all test frequency range (>=100Hz)
Agilent 4263B LCR Meter compatible IEEE-488 commands
4 different output resistance modes selectable for non-linear inductor and capacitor measuring. Measured results are compatible with Chroma (Zentech) and other well-known LCR meters
High resolution in low impedance (0.01mΩ) and high accuracy 0.3% till 100mΩ range are the right tool for low inductance, large capacitance, and low impedance component measuring
Adjustable DC Bias Current up to 200mA (Constant 25Ω), are the right tool for inductance inspection of telecom transformers and small power chokes under DC Bias Current
1320 Bias Current Source directly control capability
240 x 64 dot matrix LCD display, easy operation
0.01mΩ ~ 99.99MΩ wide measurement range with 4 1/2 digits resolution
BIAS comparator function
Comparator function and 8/99 Bin-sorting function
Alarm for PASS/ FAIL judge result
50 internal instrument setups memory
Handler interface trigger edge (rising/falling) programmable
Test signal level monitor function
Standard GPIB (IEEE-488) and handler interface
Open/ short zeroing, load correction

Specifications

Test Freq. Range High

100kHz

Resistance Range High

100MOhm

Capacitance Range High

~ 1.9999 F

Measurements

Z, L, C, Q, D, Phase, Rdc, R, X, Transformer

More Details

LCR Meter

Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.

Home
| Services | About Us | Sell Equipment | Contact | Privacy Policy

Dawson Multimedia | Web Design Orlando..